Issue link: https://resources.pcb.cadence.com/i/1180526
PSpice User Guide Setting up analyses and starting simulation October 2019 450 Product Version 17.4-2019 © 1999-2019 All Rights Reserved. 3. Do one of the following: ❑ Double-click on the simulation profile filename (*.SIM) in the list box. ❑ Enter the simulation profile filename (*.SIM) in the File name text box and click Open. 4. From the Simulation menu, choose Edit Settings to modify any of the analysis setup parameters. 5. From the Simulation menu, choose Run (or click the Run toolbar button) to begin the simulation. Setting up batch simulations Multiple simulations can be run in batch mode when starting PSpice directly with circuit file input. You can use batch mode, for example, to run a number of simulations overnight. There are two ways to do this, as described below. Multiple simulation setups within one circuit file Multiple circuit/simulation descriptions can be concatenated into a single circuit file and simulated all at once with PSpice. Each circuit/ simulation description in the file must begin with a title line and end with a .END statement. The simulator reads all the circuits in the circuit file and then processes each one in sequence. The data file and simulation output file contain the outputs from each circuit in the same order as they appeared in the circuit file. The effect is the same as if you had run each circuit separately and then concatenated all of the outputs. Running simulations with multiple circuit files You can direct PSpice to simulate multiple circuit files using either of the following methods.