Issue link: https://resources.pcb.cadence.com/i/1180526
PSpice User Guide Creating parts for models October 2019 277 Product Version 17.4-2019 © 1999-2019 All Rights Reserved. Ways to create parts for models If you want to... Then do this... To find out more, see this... ■ Create parts for a set of vendor or user-defined models saved in a model library. ■ Change the graphic standard for an existing model library. Use the Model Editor to create parts from a model library. Basing new parts on a custom set of parts on page 300 ■ Automatically create one part each time you extract a new model. Use the Model Editor 1 and enable automatic creation of parts. Using the Model Editor to create parts on page 281. For a list of device types that the Model Editor supports, see Running the Model Editor alone on page 202. If the Model Editor does not support the device type for the model definition that you want to create, then you can use a standard text editor to create a model definition using the PSpice .MODEL and .SUBCKT command syntax. Remember to configure the new model library (see Configuring model libraries on page 244). Basing new parts on a custom set of parts on page 300