Issue link: https://resources.pcb.cadence.com/i/1180526
PSpice User Guide Preparing a design for simulation October 2019 182 Product Version 17.4-2019 © 1999-2019 All Rights Reserved. 2. Select the library in which the part exists from the Library drop-down. The parts in the library are displayed in the Cells list. 3. Select the part whose properties you want to set. The part name is displayed in the Cell text box. 4. Select Symbol from the View drop-down 5. Click Open to view the symbol for the part in Design Entry HDL. 6. From the Text menu, choose Attributes. 7. Click on the origin of the symbol to display the Attributes dialog box. 8. Verify that the properties are specified correctly and make the required changes. 9. Click OK to close the Attributes dialog box. 10. From the File menu, choose Save. To find out more about setting the simulation properties for parts, see Defining part properties needed for simulation on page 308. To find out more about using the Part Developer, refer to your Part Developer User Guide. Unconfigured model, stimulus, or include files If you see messages like these in the PSpice Simulation Output window, (design_name) Floating pin: refdes pin pin_name Floating pin: pin_id File not found Can't open stimulus file or messages like these in the PSpice output file, Model model_name used by device_name is undefined. Subcircuit subckt_name used by device_name is undefined. Can't find .STIMULUS "refdes" definition