Issue link: https://resources.pcb.cadence.com/i/1180526
PSpice User Guide Setting up analyses and starting simulation October 2019 451 Product Version 17.4-2019 © 1999-2019 All Rights Reserved. Method 1 1. From the Start menu, point to the installed release, then choose PSpice. 2. Select Open Simulation from the File menu from the PSpice window. 3. Do one of the following: ❑ Type each file name enclosed in double quotation marks in the File Name text box separated by a space. ❑ Use the combination keystrokes and mouse clicks in the list box as follows: Ctrl+click to select file names one at a time, and Shift+click to select groups of files. Method 2 1. From the Start menu, point to the installed release, then choose PSpice. 2. Update the command line in the following way: ❑ Include a list of circuit file names separated by spaces. Circuit file names can be fully qualified or can contain the wild card characters (* and ?). The PSpice simulation window The PSpice Simulation Window is an MDI (Multiple Document Interface) application. This implies that you can open and display multiple files at the same time in this window. For instance, you can have a waveform file (.DAT), a circuit file (.CIR), and a simulation output file (.OUT) open and displayed in different child windows within this one window. The PSpice Simulation Window consists of three sections: the main window section where the open files are displayed, the output window section where output information such as informational, warning, and error messages from the simulator are shown, and the simulation status window section where detailed status information about the simulation are shown. These three sections are shown in Figure 8-1.