Issue link: https://resources.pcb.cadence.com/i/1180526
PSpice User Guide October 2019 133 Product Version 17.4-2019 © 1999-2019 All Rights Reserved. Part two: Design entry Part two provides information about how to enter circuit designs in design entry tools 1 such as OrCAD Capture or Design Entry HDL that you want to simulate. ■ Chapter 3, "Preparing a design for simulation," outlines the things you need to do to successfully simulate your schematic including troubleshooting tips for the most frequently asked questions. ■ Chapter 4, "Creating and editing models," describes how to use the tools to create and edit model definitions, and how to configure the models for use. ■ Chapter 5, "Creating parts for models," explains how to create symbols for existing or new model definitions so you can use the models when simulating from your schematic. ■ Chapter 6, "Analog behavioral modeling," describes how to model analog behavior mathematically or using table lookups. ■ Chapter 7, "Digital device modeling," explains the structure of digital subcircuits and how to create your own from primitives. 1. In this guide, design entry tool is used for both OrCAD Capture and Design Entry HDL. Any differences between the two tools is mentioned, if necessary. Depending on the license available, you will access either PSpice or PSpice Simulator.