Issue link: https://resources.pcb.cadence.com/i/1180526
PSpice User Guide Creating and editing models October 2019 213 Product Version 17.4-2019 © 1999-2019 All Rights Reserved. Enabling and disabling automatic part creation Part creation in the Model Editor is optional. By default, automatic part creation is enabled. However, if you previously disabled part creation, you will need to enable it before creating a new model and part. Instead of using the PSpice default part set for new models, you can have the Model Editor use your own set of standard parts. To find out more, see Basing new parts on a custom set of parts on page 300. To automatically create parts for new models 1. From the Tools menu, choose Options. 2. Select the Always Create Part when Saving Model option if it is not already checked. 3. Under Schematic Editor, select the design entry tool name. 4. Under Save Part To, enter the name of the part library for the new part. Choose either: ❑ Part Library Path Same As Model Library to create or open library file (*.olb) in Capture or a directory in Design Entry HDL that has the same name prefix as the currently open model library (*.LIB). Example: In Capture, if the model library is MYPARTS.LIB, then the Model Editor creates the part library MYPARTS.OLB. Similarly, in Design Entry HDL, if the model library is MYPARTS.LIB, then the Model Editor creates a part directory with the name MYPARTS. ❑ User-Defined Part Library, and then enter a file name in the Part Library Name text box. Note: If you select a user-defined Part library, the Model Editor saves all new parts to the specified file until you change it. Saving global models (and parts) When you save your changes, the Model Editor does the following for you: