Issue link: https://resources.pcb.cadence.com/i/1180526
PSpice User Guide Setting up analyses and starting simulation October 2019 449 Product Version 17.4-2019 © 1999-2019 All Rights Reserved. 4. In the Use Template list box, select the name of the template you want to use. By default, the netlister will use the PSPICETEMPLATE. Alternate templates in the Use Template list box will be processed in the order in which they appear. The ordering of the templates is therefore important to the netlister and determines what the output will be. Use the control buttons located directly above the Use Template list box to configure the list of templates. You can: ■ Add a new template by clicking the New icon or by double-clicking in the dashed box at the beginning of the list. ■ Delete a template by selecting the name and then clicking the Delete icon. ■ Edit a template name by selecting the name and then clicking the Edit icon. ■ Change the order of the listing (move a template up or down in the listing) by selecting the name and clicking the Up or Down arrows. Note: Templates are not specific to either a flat or hierarchical netlist. The same template may be used for both types. Starting a simulation from a Design Entry Tool After you have set up the analyses for the circuit, you can start a simulation from design entry tool in either of the following ways: ■ From the PSpice menu select Run. ■ Click the Simulate button on the PSpice toolbar. Starting a simulation outside of Design Entry Tool To start PSpice outside of Capture 1. From the Start menu, point to the installed release, then choose PSpice. 2. From the File menu, choose Open Simulation.