Issue link: https://resources.pcb.cadence.com/i/1180526
PSpice User Guide Simulation examples October 2019 75 Product Version 17.4-2019 © 1999-2019 All Rights Reserved. To create a new PSpice 1 project 1. From the Windows Start menu, choose the Cadence release and then the Capture shortcut to start Capture. 2. In the Project Manager, choose File – New – Project. 3. Select Analog or Mixed-Signal Circuit Wizard. 4. In the Name text box, enter the name of the project (CLIPPER). Note: Do not use a period (.) in the name of your projects or designs. 5. Use the Browse button to select the location for the project files, then click OK. 6. In the Create PSpice Project dialog box, select Create a blank project. 7. Click OK. No special libraries need to be configured at this time. A new page will be displayed in Capture and the new project will be configured in the Project Manager. To place the voltage sources 1. In Capture, switch to the schematic page editor. 2. Choose Place – Part to display the Place Part dialog box. 3. Add the library for the parts you need to place: a. Click the Add Library button ( ). b. Select SOURCE.OLB (from the PSpice library) and click Open. Note: There are two sets of library files supplied with Capture and PSpice. The standard schematic part libraries are found in the directory \TOOLS\CAPTURE\LIBRARY. The part libraries that are designed for simulation with PSpice are found in the sub-directory \TOOLS\CAPTURE\LIBRARY\PSPICE. In order to have access to specific parts, you must first configure the 1. Depending on the license available, you will access either PSpice or PSpice Simulator.