Issue link: https://resources.pcb.cadence.com/i/1180526
PSpice User Guide Creating and editing models October 2019 188 Product Version 17.4-2019 © 1999-2019 All Rights Reserved. How to use the tools These sections explain how to use different tools to create and edit models on their own and when editing schematic pages or parts: ■ For a list of device types that the Model Editor supports, see Table 4-2 and Table 4-3. If the Model Editor does not support the device type for the model definition that you want to create, then you can use a standard text editor to create a model definition using the PSpice 1 .MODEL and .SUBCKT command syntax. Remember to configure the new model library (see Configuring model libraries on page 244). ■ Editing model text on page 235 ■ Using the Create Subcircuit Format Netlist command (Capture only) on page 238 Other useful information These sections explain how to configure and reuse models after you have created or edited them: ■ Changing the model reference to an existing model definition on page 240 ■ Reusing instance models on page 241 ■ Configuring model libraries on page 244 1. Depending on the license available, you will access either PSpice or PSpice Simulator.