Issue link: https://resources.pcb.cadence.com/i/1180526
PSpice User Guide Creating and editing models October 2019 242 Product Version 17.4-2019 © 1999-2019 All Rights Reserved. For information on how to create instance models, see: ■ Running the Model Editor from the schematic editor on page 215. ■ Starting the Model Editor on page 216. Reusing instance models in the same schematic There are two ways to use the instance model elsewhere in the same design. To use the instance model elsewhere in your design Do one of the following: ■ Change the model reference for other part instances to the name of the new model instance. See Changing the model reference to an existing model definition on page 240. ■ From the Edit menu, use the Copy and Paste commands to place more part instances. Making instance models available to all designs If you are refining model behavior specific to your design, and are ready to make it available to any design, then you need to link the model definition to a part and configure it for global use. To make your instance model available to any design 1. Create a part and assign the instance model name to the Implementation property. See Chapter 5, "Creating parts for models" for more information. 2. If needed, move the instance model definition to an appropriate model library, and make sure the library is configured for global use. See Configuring model libraries on page 244 for more information.