Issue link: https://resources.pcb.cadence.com/i/1180526
PSpice A/D User Guide Creating and editing models October 2019 219 Product Version 17.4-2019 © 2022 All Rights Reserved. 1. From the Model menu, select Export. 2. Enter the name of the new file. Note: When you use the Export command, the model definition is saved with a .MOD extension. You cannot export multiple models to a single MOD file. Exporting a model to the same file overwrites the original contents of the MOD file. 3. If you want PSpice A/D to search this file automatically, configure it in the design entry tool (using the Library files list in the Configuration Files tab on the Simulation Settings dialog box). You cannot export multiple models to a single MOD file. Exporting a model to the same file overwrites the original contents of the MOD file. To save the new model (and part) 1. From the File menu, choose Save to update MODEL_LIBRARY_NAME.LIB, MODEL_LIBRARY_NAME.PRP (and, if you enabled part creation, MODEL_LIBRARY_NAME directory), and save them to disk. Note: To simulate the model, add the Model Library (.LIB) to the project using the PSpice menu, Edit Profile, Simulation Settings dialog box. Click the Configuration Files tab, click Library in the Category field, browse to the Model Library, and click the Add to Design button. Running the Model Editor from the schematic editor Start the Model Editor from the schematic editor when you want to: ■ in Capture to define tolerances on model parameters for statistical analysis (see Example: editing a Q2N2222 instance model on page 241) ■ test behavior variations on a part, or ■ refine a model before making it available to all designs. This means editing models for part instances on your schematic page. When you select a part instance and edit its model, the Model