Issue link: https://resources.pcb.cadence.com/i/1180526
PSpice User Guide Preparing a design for simulation October 2019 181 Product Version 17.4-2019 © 1999-2019 All Rights Reserved. Check for this if the part in question is custom-built Are there blank (or inappropriate) values for the part's Implementation and PSPICETEMPLATE properties? If so, load this part into the part editor and set these properties appropriately. One way to approach this is to edit the part that appears in your design. To edit the properties for the part in question 1. In the schematic page editor, select the part. 2. From the Edit menu, choose Part. The part editor window appears with the part already loaded. 3. From the Edit menu, choose Properties and proceed to change the property values. To find out more about setting the simulation properties for parts, see Defining part properties needed for simulation on page 308. To find out more about using the part editor, refer to your OrCAD Capture User Guide. To edit the symbol properties in Design Entry HDL, do the following: 1. From the File menu in Design Entry HDL, choose Open to display the View Open dialog box. Digital libraries with modeled parts 7400 74H DIG_ECL 74AC 74HC DIG_GAL 74ACT 74HCT DIG_MISC 74ALS 74L DIG_PAL 74AS 74LS DIG_PRIM 74F 74S