Issue link: https://resources.pcb.cadence.com/i/1180526
PSpice User Guide Importing Spice Models October 2019 867 Product Version 17.4-2019 © 1999-2019 All Rights Reserved. The relevant section from the model definition for LF442A relating pin names is shown below: Reposition the OPAMP pins as shown in the figure below: Using the line tool, draw lines to join pin numbers 3 and 4 to the modified symbol. 6. You can also change the pin numbers and the pin type using the Pin Properties dialog box. Important Do not change the pin name because pin names are used in the model library (.lib) file for model definition. 7. After modifying the symbol as per your specifications, save the symbol and the part library. You can now use the modified symbol in your design.