Issue link: https://resources.pcb.cadence.com/i/1180526
PSpice User Guide Importing Spice Models October 2019 866 Product Version 17.4-2019 © 1999-2019 All Rights Reserved. Instead of a regular triangular graphic, a rectangular graphic is generated. The numbers inside the rectangle are the pin names and the numbers outside the rectangle represent pin numbers. You will now edit the Model Editor generated symbol to have a triangular shape. 3. Delete the shape within the dotted line. 4. Redraw the required figure. For an OPAMP the required figure is a triangle. a. From the Place menu, choose Line. b. Draw a triangle as shown below. Note: For detailed procedure see the Editing part graphics section in Chapter 5, Creating parts for models of the PSpice User Guide. 5. Reposition the pins such that the inverting and the non inverting inputs are on the top left and bottom left of the modified symbol. The positive power supply should be on the top and the negative power supply at the bottom. The Output pin should be placed to the right of the modified symbol. For repositioning pins you need to refer to the pin names as well as the model definition. This is because the pin names are used for model definition.