Issue link: https://resources.pcb.cadence.com/i/1180526
PSpice A/D User Guide Simulation examples October 2019 79 Product Version 17.4-2019 © 2022 All Rights Reserved. a. Click the Add Library button ( ). b. Select ANALOG.OLB (from the PSpice library) and click Open. 2. Follow similar steps as described for the diodes to place the parts listed below, according to Figure 2-1 on page 76. The part names you need to type in the Part name text box of the Place Part dialog box are shown in parentheses: ❑ resistors (R) ❑ capacitor (C) 3. To place the off-page connector parts (OFFPAGELEFT-R), click the Place Off-Page Connector button on the tool palette. 4. Add the library for the parts you need to place: a. Click the Add Library button. b. Select CAPSYM.OLB (from the Capture library) and click Open. 5. Place the off-page connector parts according to Figure 2-1 on page 76. Note: To rotate the part so the arrows are pointing in the correct direction, place the part, select it, then press R one or more times to rotate the part to the desired orientation.