Issue link: https://resources.pcb.cadence.com/i/1180526
PSpice A/D User Guide Simulation examples October 2019 78 Product Version 17.4-2019 © 2022 All Rights Reserved. library in Capture using the Add Library function. 4. In the Part text box, type VDC. 5. Click the Place Part button ( ). 6. Move the pointer to the correct position on the schematic page (see Figure 2-1) and click to place the first part. 7. Move the cursor and click again to place the second part. 8. Right-click and choose End Mode to stop placing parts. To place the diodes 1. Add the library for the parts you need to place: a. Click the Add Library button . b. Select DIODE.OLB (from the PSpice library) and click Open. 2. In the Part text box, type D1N39 to display a list of diodes. When placing parts: ❑ Leave space to connect the parts with wires. ❑ You will change part names and values that do not match those shown in Figure 2-1 later in this section. 3. Select D1N3940 from the Part List and click Place Part ( ). 4. Press R to rotate the diode to the correct orientation. 5. Click to place the first diode (D1), then click to place the second diode (D2). 6. Right-click and choose End Mode to stop placing parts. To move the text associated with the diodes (or any other object) 1. Click the text to select it, then drag the text to a new location. To place the other parts 1. Add the library for the parts you need to place: