Issue link: https://resources.pcb.cadence.com/i/1180526
PSpice User Guide Analyzing waveforms October 2019 747 Product Version 17.4-2019 © 1999-2019 All Rights Reserved. To move cursors along a trace using the mouse 1. Use the right and left mouse buttons as described in Table 17-8 below. Note: For a family of curves (such as from a nested DC sweep), you can use the mouse or the arrow keys to move the cursor to one of the other curves in the family. You can also click the desired curve. To move cursors along a trace using the keyboard 1. Use key combinations as described in Table 17-9. Table 17-8 Mouse actions for cursor control Click this... To do this with the cursors... cursor assignment Left-click the analog trace symbol or digital trace name. Associate the first cursor with the selected trace. Right-click the analog trace symbol or digital trace name. Associate the second cursor with the selected trace. cursor movement Left-click in the display area. Move the first cursor to the closest trace segment at the X position. Right-click in the display area. Move the second cursor to the closest trace segment at the X position. Table 17-9 Key combinations for cursor control Us this key combination... To do this with the cursors... Ctrl+Left arrow key and Ctrl+Right arrow key Change the trace associated with the first cursor. Shift+Ctrl+Left arrow key and Shift+Ctrl+Right arrow key Change the trace associated with the second cursor. Left arrow key and Right arrow key Move the first cursor along the trace.