Issue link: https://resources.pcb.cadence.com/i/1180526
PSpice User Guide Analyzing waveforms October 2019 748 Product Version 17.4-2019 © 1999-2019 All Rights Reserved. Applying cursors to a different trace If you want to apply the cursors to a different trace, click the trace symbol in the plot legend for the trace you want to change to. To freeze the cursor, do one of the following: ➡ Choose Trace – Cursor – Freeze to freeze the cursor locations on the current trace. OR 1. Choose Tools – Options. The Probe Settings dialog box opens. 2. Select the Cursor Settings tab. 3. Select Show non-dockable(old) cursor window. The Probe Cursor window appears. 4. Click the Probe Cursor window (below the title bar) to freeze the cursor locations on the current trace. For more information about the cursor commands, see PSpice Help. Shift+Left arrow key and Shift+Right arrow key Move the second cursor along the trace. Home Move the first cursor to the beginning of the trace. Shift+Home Move the second cursor to the beginning of the trace. End Move the first cursor to the end of the trace. Shift+End Move the second cursor to the end of the trace. Table 17-9 Key combinations for cursor control, continued Us this key combination... To do this with the cursors...