Issue link: https://resources.pcb.cadence.com/i/1180526
PSpice User Guide Setting up analyses and starting simulation October 2019 447 Product Version 17.4-2019 © 1999-2019 All Rights Reserved. ❑ Products: This list box specifies which group of settings is active for the netlister. Selecting a different group changes the Subcircuit Patterns frame to reflect the settings of the specified tool. ❑ Global Net Prefix: This text box allows you to define the syntax of the global net of a subcircuit. ❑ Reference frame ❍ Subcircuit Call: This list box allows you to select the syntax of the subcircuit call using a modified TEMPLATE syntax. ❍ ParamList Element Definition: This list box allows you to select the syntax of how parameters are passed from a reference to a part definition. ❑ Definition frame ❍ Subcircuit Header: This list box allows you to select the syntax of the subcircuit header using a modified TEMPLATE syntax. If modified, you must make sure the definition header is consistent with the call. ❍ ParamList Element Definition: This list box allows you to select the syntax of how parameters are passed from a reference to a part definition. ❍ Param Usage Reference: This list box allows you to select the syntax used to enclose the parameters in references. ❍ Subcircuit Ends: This list box allows you to select the syntax used for the termination of a subcircuit. ❑ Save as Project Default Settings: This button saves the current settings in the CAPTURE.INI file, and thereby makes the current settings the default settings for any new Capture projects. 3. Click OK. For more detailed information about the syntax for these commands, and examples of how to use them, see the online PSpice Reference Guide.