Issue link: https://resources.pcb.cadence.com/i/1180526
PSpice User Guide Creating parts for models October 2019 304 Product Version 17.4-2019 © 1999-2019 All Rights Reserved. Here are the things to check when editing part properties: ■ Does the PSPICETEMPLATE specify the correct number of pins/nodes? ■ Are the pins/nodes in the PSPICETEMPLATE specified in the proper order? ■ Do the pin/ node names in the PSPICETEMPLATE match the pin names on the part? Defining grid spacing Grid spacing for graphics The grid, denoted by evenly spaced grid points, regulates the sizing and positioning of graphic objects and the positioning of pins. The default grid spacing with snap-to-grid enabled is 0.10", and the grid spacing is 0.01". You can turn off the grid spacing when you need to draw graphics in a tighter space. To edit the part graphics 1. In Capture's part editor, display the part you want to edit. 2. Select the line, arc, circle, or other graphic object you want to change, and do any of the following: ❑ To stretch or shrink the graphic object, click and drag one of the size handles. ❑ To move the entire part graphic, click and drag the edge of the part. The part body border automatically changes to fit the size of the part graphic. 3. After you have finished editing the part, from the File menu, choose Save to save the part to its library. Note: When changing part graphics, check to see that all pins are on the grid.