Issue link: https://resources.pcb.cadence.com/i/1180526
PSpice User Guide Creating parts for models October 2019 303 Product Version 17.4-2019 © 1999-2019 All Rights Reserved. Editing part graphics (Capture only) If you created parts using the Model Editor, and you want to make further changes, the following sections explain a few important things to remember when you edit the parts. How Capture places parts When placing parts on the schematic page, the schematic page editor uses the grid as a point of reference for different editing activities. The part's pin ends are positioned on the grid points. To edit a part in a library 1. From Capture's File menu, point to Open, then choose Library. 2. Select the library that has the part you want to edit. The library opens and displays all its parts. 3. Double-click the part you want to edit. The part appears in the part editor. 4. Edit the part. You can resize it, add or delete graphics, and add or delete pins. For more information about specific part editing tasks, refer to the OrCAD Capture User Guide. 5. After you have finished editing the part, from the File menu, choose Save to save the part to its library. grid point part body border