Issue link: https://resources.pcb.cadence.com/i/1180526
PSpice A/D User Guide Creating and editing models October 2019 226 Product Version 17.4-2019 © 2022 All Rights Reserved. 1. Invoke Project Manager. 2. In Project Manager, choose File – New. The New Project Wizard appears. 3. In the Name text box, enter the name of the project (RECTFR). 4. In the Location text box, enter the path to the directory where you want to create the project 5. Click Next. The Project Libraries dialog box appears. 6. Select ANALOG from the list of Available Libraries, and click Add. The ANALOG library is added to the Project Libraries list. 7. Add the following libraries as described in step 14 above: ❑ BREAKOUT ❑ source 8. Click Next. The Design Name dialog box appears. 9. In the Design Name text box, enter the name of the top level design (RECTFR). 10. Click Next. The Summary dialog box displays the project details. 11. Click Finish to create the project. To create the design, invoke the Design Entry HDL schematic editor. 1. In Project Manager, click on the Design Entry icon. Design Entry HDL appears. 2. From the Component menu, choose Add. The Component Browser appears. 3. Place one each of the following parts (reference designator shown in parentheses) as shown in Figure 4-5 on page 227: ❑ Dbreak (D1 diode) from the BREAKOUT library ❑ C (C1 capacitor) from the ANALOG library ❑ R (R1 resistor) from the ANALOG library ❑ VSIN (V1 sine wave source) from the SOURCE library