PSpice User Guide

PSpice User Guide

Issue link: https://resources.pcb.cadence.com/i/1180526

Contents of this Issue

Navigation

Page 224 of 896

PSpice A/D User Guide Creating and editing models October 2019 225 Product Version 17.4-2019 © 2022 All Rights Reserved. 6. Click the Ground button on the tool palette and place the '0' analog ground from the SOURCE.OLB part library. 7. From the Place menu, choose Wire, and draw the connections between parts as shown in Figure 4-4. 8. From the File menu, choose Save. Note: If you were to simulate this design using a transient analysis, you would also need to set up a transient specification for V1; most likely, this would mean defining the VOFF (offset voltage), VAMPL (amplitude), and FREQ (frequency) properties for V1. For this tutorial, however, you will not perform a simulation, so you can skip this step. 9. Invoke Project Manager. 10. In Project Manager, from the File menu, choose New. The New Project Wizard appears. 11. In the Name text box, enter the name of the project (RECTFR). 12. In the Location text box, enter the path to the directory where you want to create the project 13. Click Next. The Project Libraries dialog box appears. 14. Select ANALOG from the list of Available Libraries, and click Add. The ANALOG library is added to the Project Libraries list. 15. Add the following libraries as described in step 14 above: ❑ BREAKOUT ❑ source 16. Click Next. The Design Name dialog box appears. 17. In the Design Name text box, enter the name of the top level design (RECTFR). 18. Click Next. The Summary dialog box displays the project details. 19. Click Finish to create the project. To create the design in Design Entry HDL Create a new design project:

Articles in this issue

view archives of PSpice User Guide - PSpice User Guide