Issue link: https://resources.pcb.cadence.com/i/1180526
PSpice A/D User Guide Preparing a design for simulation October 2019 156 Product Version 17.4-2019 © 2022 All Rights Reserved. Passive parts The PSpice libraries supply several basic parts based on the passive device models built into PSpice A/D. These are summarized in the following table. To find out more about how to use these parts and define their properties, look up the corresponding PSpice device letter in the Analog Devices chapter in the PSpice A/D Reference Guide, and then see the Capture Parts sections. Breakout parts The PSpice libraries supply passive and semiconductor parts with default model definitions that define a basic set of model parameters. This way, you can easily: Table 3-1 Passive parts These parts are available... For this device type... Which is this PSpice device letter... C C_VAR capacitor C L inductor L R R_VAR resistor R XFRM_LINEAR K_LINEAR transformer K and L T ideal transmission line T TLOSSY Lossy transmission line T TnCOUPLED 1 TnCOUPLEDX 2 KCOUPLEn 2 1. For these device types, the PSpice libraries supply several parts. Refer to the PSpice A/D Reference Guide for the available parts. coupled transmission line T and K