Issue link: https://resources.pcb.cadence.com/i/1180526
PSpice User Guide Simulation examples October 2019 94 Product Version 17.4-2019 © 1999-2019 All Rights Reserved. Performing a bias point analysis To set up a bias point analysis in Capture 1. In Capture, switch to CLIPPER.OPJ in the schematic page editor. 2. From the PSpice menu, choose New Simulation Profile to display the New Simulation dialog box. 3. In the Name text box, type Bias. 4. From the Inherit From list, select None, then click Create. The Simulation Settings dialog box appears. The root schematic listed is the schematic page associated with the simulation profile you are creating. 5. From the Analysis type list, select Bias Point. 6. Click OK to close the Simulation Settings dialog box. To simulate the circuit from within Capture 1. From the PSpice menu, choose Run. PSpice simulates the circuit and calculates the bias point information. Note: Because waveform data is not calculated during a bias point analysis, you will not see any plots displayed in the Probe window for this simulation. To find out how to view the results of this simulation, see Using the simulation output file on page 96 file below. To set up a bias point analysis in Design Entry HDL 1. In Design Entry HDL, choose PSpice Simulator – New Simulation Profile to display the New Simulation dialog box. 2. In the Name text box, type Bias. 3. From the Inherit From list, select none, then click Create. The Simulation Settings dialog box appears.