PSpice User Guide
Simulation examples
October 2019 87 Product Version 17.4-2019
© 1999-2019 All Rights Reserved.
Note: The Design Entry HDL libraries are located at the
directory \share\library. To have
access to specific parts of a library, you must first add the library
to list of Project Libraries.
To add a library:
a. Click on the Setup icon in Project Manager. The Project
Setup window appears.
b. Select the Global tab.
c. Select the library you want to add from the Available
Libraries list.
d. Click Add. The library gets added to the Project Libraries
list.
e. Click OK.
To place the diodes
1. In the Component Browser, choose diode from the Library list.
2. In the Cells box, type D1N39* to display a list of diodes that
begin with D1N39.
3. Select D1N3940 and click Add.
4. Right-click on the Design Entry HDL design area and choose
Rotate to rotate the diode to the correct orientation.
5. Click to place the first diode (D1), then click to place the second
diode (D2).
When placing parts:
❑ Leave space to connect the parts with wires.
❑ You will change part names and values that do not match
those shown in Figure 2-5 later in this section.
If you make a mistake when placing parts:
❑ Choose Edit – Move. Click on the component and move the
mouse pointer to the location where you want to place the
part.
