Issue link: https://resources.pcb.cadence.com/i/1180526
PSpice User Guide Importing Spice Models October 2019 860 Product Version 17.4-2019 © 1999-2019 All Rights Reserved. Copying the symbol Before you copy the part symbol, it is recommended that you create a custom Userlib folder to store your custom symbol and model libraries. Create a sub folder in the pspice folder called Userlib to store your custom libraries. ➡ To create a new library in Capture, from the File menu, choose New and then from the submenu, choose Library. Copying parts within the same library Capture does not allow direct copying and pasting of a part in the same library. Therefore, you need to complete the following steps: 1. In Capture, open the symbol library from which you want to copy the symbol. From the File menu, choose Open and then choose Library. 2. Click on the part to be copied so that it becomes highlighted. 3. From the Edit menu choose Copy. 4. Right-click on the part you just copied and select Rename. 5. Type in the name of the new part and click OK. 6. From the Edit menu, choose Paste to paste the original part back into the library. Copying a part to another library 1. Open two part libraries in Capture. First, the source library from which the part is to be copied and the second, the destination library to which the model is to be copied. From the File menu, choose Open | Library. 2. In the Project Manager for the symbol library, position the libraries in a way to enable dragging the part from one library to another. 3. While holding down the Ctrl key, drag and drop the required part from the source library to the destination library. Note: Alternatively, you can copy the desired part with 'Edit | Copy' and 'Edit | Paste' commands.