Issue link: https://resources.pcb.cadence.com/i/1180526
PSpice User Guide Bias Point Display October 2019 828 Product Version 17.4-2019 © 1999-2019 All Rights Reserved. Toggling a specific power bias display To turn on the display of a specific power bias point: 1. In Capture, from the Edit menu, choose Select All. 2. Click the Toggle Selected Bias Power button in the Bias Point toolbar ( ) This will either turn off all power bias values for every power source on the schematic page, or they will all be turned on, depending on the previous state. Click the button again, if necessary, to turn everything off. If there is no change in the display either way, be sure that Enable Bias Power Display is checked. 3. Click the mouse on an empty area of the schematic page to deselect everything. 4. Click the specific power source you want to display the voltage on, in order to select it. 5. Click the Toggle Selected Bias Voltage button in the Bias Point toolbar ( ). You should now see only the voltage bias point value for the specific pin you are interested in. All other voltage bias points on the schematic page should be turned off.