Issue link: https://resources.pcb.cadence.com/i/1180526
PSpice User Guide Other Output Options October 2019 813 Product Version 17.4-2019 © 1999-2019 All Rights Reserved. Creating test vector files The design entry tools provide a special VECTOR part that lets you save digital simulation results to a vector file. Whenever any net with an attached VECTOR part changes state, PSpice writes a line of time-value data to the vector file using the same format as the file stimulus device. This means that you can use the vector file to drive inputs for another simulation. To find out about vector file syntax, refer to the online PSpice Reference Guide. To find out about setting up digital stimuli, see Defining a digital stimulus on page 607. To generate a test vector file from your circuit 1. Place a VECTORn part (from the PSpice library SPECIAL.OLB) and connect it to a wire or bus at the output of a digital part instance. 2. Double-click the VECTORn part instance to display the Parts spreadsheet. 3. Set the part properties as described below. Table 19-3 For this property... Define this... POS Column position in the file. Valid values range from 1 to 255. double-click here to edit the POS property double-click here to edit all properties