Issue link: https://resources.pcb.cadence.com/i/1180526
PSpice User Guide Analyzing waveforms October 2019 734 Product Version 17.4-2019 © 1999-2019 All Rights Reserved. Note: You can also open the Y Axis tab in the Axis Settings dialog box by double-clicking the y-axis in the Probe window. a. In the Data Range frame, choose User Defined and set the range from -5 to 5. This will change the range for the current y-axis. b. Click OK. Note: In the Y Axis Settings dialog box, you can change the settings for another y-axis by selecting it from the Y Axis Number box. 3. From the Plot menu, choose Add Y Axis. The Probe window display should now look like Figure 17-9 below. Note that the V(U3A:A) label at the bottom of the plot is preceded by a boxed 1. This indicates that the far-left y-axis applies to the V(U3A:A) waveform. To view traces for V(CLK), RESET, and OUT 1. From the Trace menu, choose Add Trace to display the Add Traces dialog box. 2. In the Simulation Output Variables list, click V(U1A:CLK), RESET, and OUT. The trace names appear in the Trace Expression text box. Note: You can add up to 75 digital traces to the digital portion of the plot. If you add more traces than can be displayed, PSpice A/D scrolls the traces upwards so you can see the last trace added. A + character in front of the highest or lowest trace name indicates that there are more traces above or below the marked traces. 3. Click OK to plot the traces. The plot displays a digital area above the analog area as shown in Figure 17-10 below.