Issue link: https://resources.pcb.cadence.com/i/1180526
PSpice User Guide Digital simulation October 2019 611 Product Version 17.4-2019 © 1999-2019 All Rights Reserved. Initial Value = 1 Time Delay = 5ns 6. From the File menu, choose Save. To change clock attributes 1. In the Stimulus Editor, do one of the following: ❑ Double-click the clock name to the left of the axis. ❑ Click the clock name and from the Edit menu, choose attributes. 2. Modify the clock attributes as needed. 3. Click OK. Defining bus transitions There are three steps for creating a bus: 1. Creating the digital bus stimulus. 2. Introducing transitions. 3. Optionally defining the radix for bus values. These steps are described in detail in the following procedures. To create a digital bus stimulus 1. From the Stimulus menu, choose New. 2. In the Name text box, enter Bus. 3. In the Digital frame, select Bus. 4. If needed, change the bus width from its default value of 8 bits. To do this, in the Width text box, type a different integer. 5. Click OK. During any interval, the bits on the bus lines represent a value from zero through (2 n - 1), where n is the number of bus lines. To set bus values, introduce transitions using either of the two methods described below.