Issue link: https://resources.pcb.cadence.com/i/1180526
PSpice User Guide Digital simulation October 2019 609 Product Version 17.4-2019 © 1999-2019 All Rights Reserved. To add a transition 1. From the Plot menu, choose Axis Settings. 2. Enter values in the Displayed Range for Time text boxes and the Timing Resolution text box as required for adding transitions. For example, if you wish to add transitions every 1ms, set the Timing Resolution to 1ms. 3. Select the digital stimulus you want to edit. When you select a transition to edit, a red handle appears. 4. From the Stimulus Editor's Edit menu, choose Add. 5. Click the waveform at the time where the transition is required. 6. Repeat step 4 to add additional transitions. 7. When you finish, right-click to exit the edit mode. To move a transition 1. Click the transition you want to move. 2. If needed, use Shift+click to select additional transitions on the same signal or different signals. 3. Reposition the transition (or transitions) by dragging. Note: If you press Shift while dragging, then all selected transitions move by the same amount. To edit a transition 1. Do one of the following: ❑ Select the transition you want to edit and from the Edit menu, choose Attributes. ❑ Double-click the transition you want to edit. 2. In the Edit Digital Transition dialog box, edit the timing and value of the transition. 3. Click OK.