Issue link: https://resources.pcb.cadence.com/i/1180526
PSpice User Guide Setting up analyses and starting simulation October 2019 462 Product Version 17.4-2019 © 1999-2019 All Rights Reserved. 2. In Capture, open the design you want to simulate. 3. From the PSpice menu, choose Edit Simulation Profile. The Simulation Settings dialog box appears. 4. Click on the Configuration Files tab 5. Click Include in the Category field to display the Include files list. 6. Under the Filename text box, enter the name of the text file you created in Step 1, or click the Browse button to locate the file and enter the full path and filename. 7. Click the Add to Design button to include the file as part of the circuit. 8. Click OK. When you run the simulation, the scheduled parameter changes will be included as part of the circuit file and the simulation will run to completion automatically. Setting Autoconvergence from the Runtime Settings Dialog Box The RunTime Settings dialog box allows you to set autoconvergence options during a simulation run. From this dialog box, you can select: ■ Autoconvergence ■ Enable Advanced Convergence Algorithms To enable autoconvergence: 1. Select Autoconvergence. 2. You can either use the default relaxed limits for parameters or click Settings and change the limits. Note: Refer to Setting AutoConvergence on page 429 for information on the limits in autoconvergence. To enable advanced convergence algorithms: 1. Select Transient and Bias Point options in the Analog Advanced tree structure of the Options tab.