Issue link: https://resources.pcb.cadence.com/i/1180526
PSpice User Guide Creating parts for models October 2019 319 Product Version 17.4-2019 © 1999-2019 All Rights Reserved. MNTYMXDLY All digital parts provided in the PSpice libraries have a MNTYMXDLY property. The MNTYMXDLY property defines the digital propagation delay level that PSpice must use for a digital part. To find out more about propagation delays, see Timing characteristics on page 387 and Selecting propagation delays on page 623. To use the MNTYMXDLY property with a digital part 1. Add the MNTYMXDLY property to the part and assign a value shown in the table below. 2. Use this property in the PSPICETEMPLATE property definition (MNTYMXDLY is also a subcircuit parameter used in calls for digital subcircuits). Example: PSPICETEMPLATE=X^@REFDES %A %B %C %D %PWR %GND @MODEL PARAMS:\n+ IO_LEVEL=@IO_LEVEL MNTYMXDLY=@MNTYMXDLY Note: For clarity, the PSPICETEMPLATE property value is shown here in multiple lines; in a part definition, it is specified in one line (no line breaks). Table 5-8 Assign this value... To use this propagation delay... 0 circuit-wide default 1 minimum 2 typical 3 maximum 4 worst-case (min/max)