Issue link: https://resources.pcb.cadence.com/i/1180526
PSpice User Guide Creating parts for models October 2019 301 Product Version 17.4-2019 © 1999-2019 All Rights Reserved. To create a custom set of parts for automatic part generation 1. Create a part library with the custom parts. Be sure to name these parts by their device type as shown in Table 5-1 and Table 5-2; this is how the Model Editor determines which part to use for a model definition. For more information on creating parts, refer to the OrCAD Capture User Guide. Table 5-1 Symbol Names for custom symbol generation for regular PSpice models For this device type... Use this symbol name... For this device type... Use this symbol name... Bipolar transistor: LPNP LPNP Magnetic core CORE Bipolar transistor: NPN NPN MOSFET: N-channel NMOS Bipolar transistor: PNP PNP MOSFET: P-channel PMOS Capacitor 1 CAP OPAMP: 5-pin OPAMP5 Darlington: N-channel DARNPN OPAMP: 7-pin OPAMP7 Darlington: P-channel DARPNP Resistor 1 RES Diode DIODE Switch: voltage-controlled 1 VSWITCH GaAsFET 1 GASFET Transmission line 1 TRN IGBT: N-channel NIGBT Voltage comparator VCOMP Inductor 1 IND Voltage comparator: 6 pin VCOMP6 JFET: N-channel NJF Voltage reference VREF JFET: P-channel PJF Voltage regulator VREG 1. Does not apply to the Model Editor. Table 5-2 Symbol Names for Custom Symbol Generation for template-based Models For this device type... Use this symbol name... For this device type... Use this symbol name... Bipolar transistor: LPNP Magnetic core AACORE