Issue link: https://resources.pcb.cadence.com/i/1180526
PSpice User Guide Creating parts for models October 2019 294 Product Version 17.4-2019 © 1999-2019 All Rights Reserved. 2. Create a circuit design as shown in the figure below. The model CA1458, is also a multi-level model. By default, the model level is 3. For OPA_LOCAL, the value of the LEVEL property is set to2. Note: You can also pick the design from, ..\tools\pspice\tutorial\concept\modeleditor. Besides the local_lib, and opa.lib other libraries included in the project are pspice_elem and analog. If you use the design from the hierarchy, edit the cds.lib to specify the correct location of local_lib. 3. To simulate the circuit, choose Run from the PSpice menu in Design Entry HDL. Changing the level of simulation parameters used in the design We will now modify the circuit design, such that level 2 simulation parameters are used for CA1458 and level 3 simulation parameters are used for the OPA_LOCAL model, created using the Model Editor. Changing the level for CA1458 To change the level of simulation parameters for CA1458 from 3 to 2, 1. Select the part CA1458.