Issue link: https://resources.pcb.cadence.com/i/1180526
PSpice User Guide Creating parts for models October 2019 281 Product Version 17.4-2019 © 1999-2019 All Rights Reserved. Using the Model Editor to create parts If you want to create new parts that are not tied to a local design, open the Model Editor alone. Using Model Editor, you can create parts in two modes: ❑ Batch mode ❑ Interactive mode Batch mode of part creation In this method, you use the Export to Capture Part Library or Export to Design Entry HDL Part Library command from the File menu, to create part symbols for all models in a simulation library. In this approach, you can view the symbols only after all the changes have been done and saved in the .olb file. You need to open the .olb file in Capture and view the symbols. To know more about how to use the Export to Capture Part Library or Export to Design Entry HDL Part Library command for part creation see Using batch mode on page 282. Interactive mode of part creation In this mode, you can view the part symbol being attached to a simulation model before the changes are saved in the symbol library. You can also update and attach symbols of your own choice to the models in the library. To create Capture or Design Entry HDL symbols in an interactive mode, choose Model Import Wizard [design entry tool] command, from the File menu. When you generate part symbols using Model Import wizard, you can review the symbol shapes before you save the changes to the part library. This is unlike using Export To Capture Part Library or Export To Design Entry HDL Part Library command, where all the changes are made to the part library before you can review the symbols by opening them in the design entry tool. In the Model Import Wizard, specify the input model library and the output symbol library and click Next. The model names and the