Issue link: https://resources.pcb.cadence.com/i/1180526
PSpice A/D User Guide Creating and editing models October 2019 257 Product Version 17.4-2019 © 2022 All Rights Reserved. If you select this check box, the following precedence for models takes place: 1. Models referred directly on schematic or design: If there is a model with multiple definitions in the configured libraries, then models are accessed as per the order explained above. 2. Model referred by a subcircuit model definition: For the models that are referred to from a specific subcircuit model definition, highest precedence is assigned to the model definition found in same library file. If models or subcircuits are not found in the current library, then they are searched from other libraries as per the order of access explained above. Example If a subcircuit, TOP_B in a library file LIBRARY_B refers to another model/subcircuit, then this model/subcircuit will first be searched in the current library where TOP_B is defined, that is LIBRARY_B. On a schematic, if you have placed the following parts: ■ Subcircuit, TOP_B ❑ Which refers to subcircuit, SUB_TOP_B ❍ Where SUB_TOP_B refers to model, MOSFET_M ■ Model, DIODE_M The order in which libraries are indexed is as follows: 1. LIBRARY_A, has the following definition: