Issue link: https://resources.pcb.cadence.com/i/1180526
PSpice User Guide Creating and editing models October 2019 234 Product Version 17.4-2019 © 1999-2019 All Rights Reserved. ■ LOCAL_LIB.PRP - The device property file containing device specific information for all the models in the LOCAL_LIB.LIB. Saving the LOCAL_LIB library completes the tasks of creating a template-based PSpice model for Operational Amplifier. Because of the multiple-level support for Advanced Analysis OPAMP models in the Model Editor, instead of one, three models are created. Note: Deleting a Model Editor-created multiple-level model deletes the model only from the library. The model information is not deleted from the device property file. This is because, all three OPAMP models are linked to the same section in the device property file. The device property section for the model will be deleted only after all the linked models are deleted. Note: If you have Advanced Analysis installed, the Smoke tab also appears besides the Simulation tab, and you can also add smoke information to the model. See Adding smoke information to the OPA_LOCAL operational amplifier model on page 259. Note: Example covered in the section, Creating parts in the batch mode on page 290 in Chapter 5, "Creating parts for models" is an extension of this example. It covers part creation using Model Editor and using Model Editor-created parts in a schematic.