Issue link: https://resources.pcb.cadence.com/i/1180526
PSpice User Guide Creating and editing models October 2019 200 Product Version 17.4-2019 © 1999-2019 All Rights Reserved. Note: For a list of device types that the Model Editor supports, see Table 4-2 and Table 4-3. If the Model Editor does not support the device type for the model definition that you want to create, then you can use a standard text editor to create a model definition using the PSpice .MODEL and .SUBCKT command syntax. Remember to configure the new model library (see Configuring model libraries on page 244). Using the Model Editor The Model Editor converts information that you enter from the device manufacturer's data sheet into either: ■ model parameter sets using PSpice .MODEL syntax, or ■ subcircuit netlists using PSpice .SUBCKT syntax. Note: The Extract Model view in the Model Editor does not support the following subcircuit constructs: ❑ optional nodes construct, OPTIONAL: ❑ variable parameters construct, PARAMS: ❑ local .PARAM command ❑ local .FUNC command To refine the subcircuit definition for these constructs, use the Model Text view in Model Editor, described in Editing model text on page 235. ■ Derive subcircuit definitions from a hierarchical schematic. In the Project Manager, select the .DSN file. From the Tools menu, choose Create Netlist, select the PSpice tab, and then check the Create Subcircuit Format Netlist check box. Using the Create Subcircuit Format Netlist command (Capture only) on page 238. If you want to... Then do this... To find out more, see this...