Issue link: https://resources.pcb.cadence.com/i/1180526
PSpice User Guide Simulation examples October 2019 102 Product Version 17.4-2019 © 1999-2019 All Rights Reserved. c. Right-click to display the crosshairs for the second cursor. Table 2-1 Association of cursors with mouse buttons. In the trace legend, the part for V(In) is outlined in the crosshair pattern for each cursor, resulting in a dashed line as shown in Figure 2-11. 3. Place the first cursor on the V(In) waveform: a. Click the portion of the V(In) trace in the proximity of 4 volts on the x-axis. The cursor crosshair appears, and the current X and Y values for the first cursor appear in the cursor window. b. To fine-tune the cursor location to 4 volts on the x-axis, drag the crosshairs until the x-axis value of the A1 cursor in the cursor window is approximately 4.0. You can also press Right arrow key and Left arrow key for tighter control. Note: Your ability to get as close to 4.0 as possible depends on screen resolution and window size. 4. Place the second cursor on the V(Mid) waveform: a. Right-click the trace legend part (diamond) for V(Mid) to associate the second cursor with the Mid waveform. The crosshair pattern for the second cursor outlines the V(Mid) trace part as shown in Figure 2-12. cursor 1 left mouse button cursor 2 right mouse button Figure 2-11 Trace legend with cursors Figure 2-12 Trace legend with V(Mid) symbol outlined.