Issue link: https://resources.pcb.cadence.com/i/1180526
PSpice A/D User Guide
Importing Spice Models
October 2019 868 Product Version 17.4-2019
© 2022 All Rights Reserved.
Introduction
Usually, the Spice models downloaded from a Vendor's web site
cannot be used directly in PSpice A/D. This document covers the
steps to be covered before you can successfully use the downloaded
models for designing your circuits.
Before you can use the simulation models downloaded from a web
site in your design, you need to perform following steps:
■ Importing text models
■ Generating Part Symbols
■ Configuring new model library
Importing text models
To import the downloaded Spice models into PSpice A/D, you need
to perform the following steps.
1. Rename the downloaded model to have the .MOD extension.
Note: Renaming is required only if the downloaded model does
not have a .MOD extension. For example, renaming will be
required if the download model has a .txt extension.
2. Launch the Model Editor.
3. Open a new or your custom model library.
4. From the Model menu, choose Import.
5. In the Open dialog box, select the downloaded model with the
.MOD extension and select Open.
Note: Only the first model in the .MOD file is imported.
Therefore, it is recommended that the .MOD file should not have
more than one model.
6. From the file Menu, choose Save As. In the Save As dialog box,
specify the name and location of new model library as