Issue link: https://resources.pcb.cadence.com/i/1180526
PSpice User Guide Importing Spice Models October 2019 863 Product Version 17.4-2019 © 1999-2019 All Rights Reserved. Note: If no symbol was associated to the model by the Model Import wizard, use the Associate Symbol button that is available instead of the Replace Symbol button. 2. In the Select Matching page of the wizard, specify the path to the symbol library containing the symbol to be associated with the downloaded model. 3. From the Matching Symbols list, select the symbol that you want to associate with the downloaded model and click the Save Symbol button. 4. In the Associate/Replace Symbol page, the selected symbol name appears against the downloaded model name. Click Finish to save your changes to the symbol library. When you use the Model Import wizard to generate or associate symbols to a downloaded model, all the required properties, such as IMPLEMENTATION TYPE, IMPLEMENTATION, and PSPICETEMPLATE, are also updated. Therefore, you need not modify these properties manually. Configuring new model library After you have generated the part library for a new/customized model library, you need to make the model library available to the design. To ensure this you need to add the model library containing your custom simulation models to the project simulation profile. 1. In Capture, open your Analog or Mixed-Circuit project. 2. From the PSpice menu, choose Edit Simulation Profile. 3. Select the Configuration Files tab.