Issue link: https://resources.pcb.cadence.com/i/1180526
PSpice User Guide Setting initial state October 2019 831 Product Version 17.4-2019 © 1999-2019 All Rights Reserved. Load bias point Load bias point is a simulation control function that allows you to set the bias point as an initial condition. A common reason for giving PSpice initial conditions is to select one out of two or more stable operating points (set or reset for a flip-flop, for example). To use load bias point 1. Run a simulation using the Save Bias Point option in the Simulation Settings dialog box. See Setting up analyses on page 419 for a description of the Analysis Setup dialog box. 2. Before running another simulation, click the Analysis tab in the Simulation Settings dialog box. 3. Under Options, select Load Bias Point. 4. Specify a bias point file to load. Include the path if the file is not located in your working directory, or use the Browse button to find the file. 5. Click OK.