Issue link: https://resources.pcb.cadence.com/i/1180526
PSpice User Guide Bias Point Display October 2019 826 Product Version 17.4-2019 © 1999-2019 All Rights Reserved. Important In order to access the PSpice menu in Capture, you must be working with a project that can be simulated. You must create a project (not a design) and select the Analog or Mixed-Signal Circuit Wizard option in order to be able to simulate the design with PSpice. Toolbar controls for bias point display The following table explains the control buttons in the Bias Point toolbar buttons on the Pspice toolbar. The Bias Point toolbar buttons on the Pspice toolbar in Capture Toolbar Icon Description Enable Bias Voltage Display Enables or disables the display of voltage bias points for all wires in the entire design. Toggle Selected Bias Voltage Turns on or off the display of voltage bias points for selected wires. Enable Bias Current Display Enables or disables the display of current bias points for all modeled pins in the entire design. Toggle Selected Bias Current Turns on or off the display of current bias points for selected modeled pins.