PSpice User Guide

PSpice User Guide

Issue link: https://resources.pcb.cadence.com/i/1180526

Contents of this Issue

Navigation

Page 812 of 896

PSpice A/D User Guide Measurement expressions October 2019 813 Product Version 17.4-2019 © 2022 All Rights Reserved. The range can be specified as floating-point values, as a percent of the full range, as marked points, or as an expression of marked points. The default range is all points available. Examples [for] [repeat:] Specifies which occurrence of to find. If repeat is greater than the number of found instances of , then the last found is used. Example The argument: 2:LEvel would find the second level crossing. Must be exactly one of the following: ■ LEvel(value[,posneg]) ■ SLope[(posneg)] ■ PEak ■ TRough ■ MAx This range… Means this… (1n,200n) X range limited from 1e-9 to 200e-9, Y range defaults to full range (1.5,20e-9,0,1m ) both X and Y ranges are limited (5m,1,10%,90% ) both X and Y ranges are limited (0%,100%,1,3) full X range, limited Y range (,,1,3) full X range, limited Y range (,30n) X range limited only on upper end

Articles in this issue

view archives of PSpice User Guide - PSpice User Guide