Issue link: https://resources.pcb.cadence.com/i/1180526
PSpice User Guide Other Output Options October 2019 811 Product Version 17.4-2019 © 1999-2019 All Rights Reserved. Generating tables of voltage and current values You can generate tables of voltage and current values on nets for any DC sweep, AC sweep, or transient analysis. To generate tables of voltage or current to the output file 1. Place and connect any of the following parts (from the PSpice library SPECIAL.OLB). 2. Double-click the part instance to display the Parts spreadsheet. 3. Click the property name for the analysis type that you want tabulated: DC, AC, or TRAN. 4. In the columns for the analysis type that you want plotted (DC, AC or TRAN), type any non-blank value such as Y, YES or 1. 5. If you selected the AC analysis type, enable an output format. a. Click the property name for one of the following output formats: MAG (magnitude), PHASE, REAL, IMAG (imaginary), or DB. b. Type any non-blank value such as Y, YES or 1. c. Repeat step a and step b for as many AC output formats as you want to see tabulated. Note: If you do not enable a format, PSpice defaults to MAG. Table 19-2 Use this part... To tabulate this... VPRINT1 Voltage on the net that the part terminal is connected to. VPRINT2 Voltage differential between the two nets that the part terminals are connected to. IPRINT Current through a cut in the net. (Insert this part in series, like a current meter.)