Issue link: https://resources.pcb.cadence.com/i/1180526
PSpice User Guide Analyzing waveforms October 2019 740 Product Version 17.4-2019 © 1999-2019 All Rights Reserved. ■ Hide All Traces: Hides all displayed traces. ■ Show All Traces: Shows all traces. You can also right-click on the probe window to choose either Show All Traces or Hide All Traces. Sizing digital plots Sizing bars can be used to change the digital plot size instead of choosing Digital Size from the Plot menu. The digital trace name sizing bar is at the left vertical boundary of the digital plot. If an analog plot area is displayed simultaneously with the digital plot, there is an additional plot sizing bar at the bottom horizontal boundary of the digital plot. To set the digital plot size using the mouse 1. Display at least one digital trace and one analog trace in the Probe window for which you want to set the digital size. 2. To change the bottom position of the digital Probe window, do the following: a. Place the mouse pointer between the analog and digital parts of the plot. b. Click the plot separator. c. Drag the plot separator until you have the digital size you want. 3. To change the left side of the digital Probe window, do the following: a. Place the mouse pointer at the left edge of the digital Probe window you want to resize. b. Click the left edge. c. Drag the left edge of the digital Probe window to adjust the space available for displaying digital trace names.