Issue link: https://resources.pcb.cadence.com/i/1180526
PSpice User Guide Analyzing waveforms October 2019 689 Product Version 17.4-2019 © 1999-2019 All Rights Reserved. Pausing a simulation and viewing waveforms You can pause a simulation to analyze waveforms before the simulation is finished. After you pause the simulation, you can either resume the simulation or end it. To pause a simulation 1. From PSpice's Simulation menu, choose Pause. 2. In the Probe window, view the waveforms generated before you paused the simulation. 3. Do one of the following: ❑ From the Simulation menu, choose Run to resume the simulation. ❑ From the Simulation menu, choose Stop to stop the simulation. New x-axis variable 1. From the Plot menu, choose Axis Settings, then click the X Axis tab. 2. Click the Axis Variable button. 3. In the X Axis Variable dialog box, specify a new x-axis variable. Measurement evaluation 1. From the Trace menu, select Evaluate Measurement. 2. In the Evaluate Measurement dialog box, specify a measurement. Load a completed data section 1. From the File menu, choose Append Waveform (.DAT). 2. Select a .DAT file to append. Table 17-4 Enable this function... By doing this...