Issue link: https://resources.pcb.cadence.com/i/1180526
PSpice User Guide Transient analysis October 2019 544 Product Version 17.4-2019 © 1999-2019 All Rights Reserved. Deleting and removing traces To delete a trace from the displayed screen, select the trace name by clicking on its name, then press Delete. This will only erase the display of the trace, not delete it from your file. The trace is still available by selecting Get from the Stimulus menu. To remove a trace from a file, select Remove from the Stimulus menu. Note: Once a trace is removed, it is no longer retrievable. Remove traces with caution. Manual stimulus configuration Stimuli can be characterized by manually starting the Stimulus Editor and saving their specifications to a file. These stimulus specifications can then be associated to stimulus instances in your schematic or to stimulus symbols in the symbol library. To manually configure a stimulus 1. Start the Stimulus Editor by choosing the Stimulus Editor icon from the Windows Start menu, installed OrCAD program group, PSpice Accessories option. 2. Open a stimulus file by choosing Open from the File menu. If the file is not found in your current library search path, you are prompted for a new file name. 3. Create one or more stimuli to be used in your schematic. For each stimulus: a. Name it whatever you want. This name will be used to associate the stimulus specification to the stimulus instance in your schematic, or to the symbol in the symbol library. b. Provide the transient specification. c. From the File menu, choose Save. 4. In the schematic page editor, configure the Stimulus Editor's output file into your schematic: